Gravity Lock double locking with bottom die pressed plate with Automatic resetting for threaded bolt M 16 or 5/8″ BSW. With head plate, couplable for pressed packages. By coupling the cap and the head plate becomes a unit to eliminate leakage. No undesired re-pressing/ compaction of the material column, while dyeing from outside to inside with limitation of height, by means of 2 lock nuts on the threaded bolt.
Gravity Lock double locking with bottom die pressed plate and inside gasket with Automatic resetting for threaded boltM16 or 5/8″ BSW. With head plate, couplable for pressed packages. By coupling the cap and the head plate becomes a unit to eliminate leakage. No undesired re-pressing/ compaction of the material column, while dyeing from outside to inside with limitation of height, by means of 2 lock nuts on the threaded bolt.
Gravity Lock double locking with inside and outside gasket and head plate with body and coupling ring with automatic resetting for threaded bolt M 16 or 5/8" BSW. With head plate, couplable for pressed packages. By coupling the cap and the head plate becomes a unit to eliminate leakage. No undesired re-pressing / compaction of the material column, while dyeing from outside to inside with limitation of height, by means of 2 lock nuts on the threaded bolt.
Gravity Lock double locking with inside and outside gasket and head plate with body and coupling ring with automatic resetting for threaded bolt M 16 or 5/8″ BSW. With head plate, couplable for pressed packages. By coupling the cap and the head plate becomes a unit to eliminate leakage. No undesired re-pressing/ compaction of the material column, while dyeing from outside to inside with limitation of height, by means of 2 lock nuts on the threaded bolt.
Gravity Lock with spring having distance piece for protection of spring with inside gasket. Shaft / inner sealing for an optimal seal between the cap and the spindle bolt. Also available without lever arm for opening for automatic loading and unloading.
Gravity Lock with spring
Available also: without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel.
Spring: 2.65 mm – -180 N
Standard: 3.0 mm – -250 N
Gravity Lock with spring with inside gasket. Shaft/inner sealing for an optimal seal between the cap and the spindle bolt.
Also available without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel.
Spring : 2.65 mm – -180 N
Standard : 3.0 mm – -250 N
Gravity Lock with silicon gasket at bottom. Gravity locks with automatic resetting for threaded bolt M16 or 5/8″ BSW
Available Also: H=25 mm, H=100 mm
Gravity Lock with silicon gasket at bottom. Gravity locks with automatic resetting for threaded bolt M16 or 5/8″ BSW
Available Also: H=25 mm, H=60 mm, H=100 mm
Gravity Lock with silicon gasket at bottom and inside. Gravity locks with automatic resetting for threaded bolt M16 or 5/8″ BSW.
Shaft /inner sealing for an optimal seal between the cap and the spindle bolt.
Available Also: H=25mm, H=60mm, H=100mm
Gravity Lock with bosch. Gravity locks with automatic resetting for threaded bolts M16 or 5/8′ BSW. Mainly used for pressed packages.
For columms of packages which tend to sink the caps reset under their own weight and automatically re-lock, to eliminate leakages between cap and head plate.
Gravity lock with die plate with automatic resetting for threaded bolt M 16 or 5/8″ BSW.
Gravity Lock with spring with inside bottom plate having 2.5mm thickness. Suitable for plastic tubes. Shaft / inner sealing for an optimal seal between the cap and the spindle bolt. (Suitable for plastic dye tube having sizes.
Also available without lever arm for opening for half spring travel.
Spring: 2.65mm~180mm N
Standard: 3.25mm~250 N
Gravity Lock with spring with inside gasket and deep bottom plate having 2.5mm thickness with inside silicon ring to fit plastic tubes. Shaft / inner sealing for an optimal seal between the cap and the spindle bolt. (Suitable for plastic dye tube having sizes-63OD X 57ID) Lock bottom inside ring size 57 OD X 46 IDx 12mm height.
Also available without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel.
Spring: 2.65 mm – -180 N
Standard: 3.25 mm – -250 N
Gravity Lock with spring with big cup bottom to be used directly on plastic tubes without top plates. Shaft / inner sealing for an optimal seal between the cap and the spindle bolt.
(Suitable for plastic dye tube having sizes-63OD x 57ID / 62OD x 54 ID). Also available without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel.
Spring: 2.65mm~180mm N Standard
Gravity Lock with spring with small cup bottom to be used directly on plastic tubes without top plates. Shaft / inner sealing for an optimal seal between the cap and the spindle bolt. (Suitable for plastic dye tube having sizes-58OD x 53ID).
Also available without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel.
Spring: 2.65mm~180mm N Standard