|
|
 |
|
 |
Dyeing Machines Accessories |
|
|
 |
(SEC-001) GRAVITY LOCK DOUBLE LOCKING |
|
|
Gravity Lock double locking with bottom die pressed plate with Automatic resetting for threaded bolt M16 or 5/8" BSW.
With head plate, couplable for pressed packages. By coupling the cap and the head plate becomes a unit to eliminate leakage. No undesired re-pressing/ compaction of the material column, while dyeing from outside to inside with limitation of height, by means of 2 lock nuts on the threaded bolt. |
|
|
|
|
(SEC-002) GRAVITY LOCK DOUBLE
LOCKING WITH GASKET |
|
|
Gravity Lock double locking with bottom die pressed plate and inside gasket with Automatic resetting for threaded bolt M16 or 5/8" BSW.
With head plate, couplable for pressed packages. By coupling the cap and the head plate becomes a unit to eliminate leakage. No undesired re-pressing/ compaction of the material column, while dyeing from outside to inside with limitation of height, by means of 2 lock nuts on the threaded bolt. |
|
|
|
|
(SEC-003) GRAVITY LOCK DOUBLE
LOCKING WITH DOUBLE GASKET (50 mm) |
|
|
Gravity Lock double locking with inside and outside gasket and head plate with body and coupling ring with automatic resetting for threaded bolt M16 or 5/8 " BSW.
With head plate, couplable for pressed packages. By coupling the cap and the head plate becomes a unit to eliminate leakage. No undesired re-pressing/ compaction of the material column, while dyeing from outside to inside with limitation of height, by means of 2 lock nuts on the threaded bolt. |
|
|
|
|
(SEC-004) GRAVITY LOCK
DOUBLE LOCKING WITH DOUBLE GASKET (25 mm)
|
|
|
Gravity Lock double locking with inside and outside gasket and head plate with body and coupling ring with automatic reselling for threaded boltMl6 or 5/8" BSW.
With head plate, couplable for pressed packages. By coupling the cap and the head plate becomes a unit to eliminate leakage. No undesired re-pressing/ compaction of the material column, while dyeing from outside lo inside with limitation of height, by means of 2 lock nuts on the threaded bolt. |
|
|
|
Top |
|
|
(SEC-005) GRAVITY LOCK SPRING |
|
|
Gravity Lock with spring having distance piece for protection of spring with inside gasket. Shaft /inner sealing for an optimal seal between the cap and the spindle bolt.
Available also: with lever arm for opening for automatic loading and unloading. |
|
|
|
|
(SEC-006) GRAVITY LOCK WITH SPRING |
|
|
Gravity Lock With Spring.
Available also: without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel.
Spring: 2.65 mm - ~180 N Standard 3.0mm-~ 250N |
|
|
|
|
(SEC-007) GRAVITY LOCK SPRING |
|
|
Gravity Lock with spring with inside gasket. Shaft /inner sealing for an optimal seal between the cap and the spindle bolt.
Available also: without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel.
Spring: 2.65 mm - ~180 N Standard 3.0mm-~ 250N |
|
|
|
| Top |
|
|
(SEC-008) GRAVITY LOCK WITH SILICON GASKET (50 mm) |
|
|
Gravity Lock with silicon gasket at bottom. Gravity locks with automatic resetting for threaded bolt M16 or 5/8" BSW.
Also Available:
H = 25mm
H = 60 mm
H = 100mm |
|
|
|
|
(SEC-009) GRAVITY LOCK WITH SILICON GASKET
(75 mm)
|
|
|
Gravity Lock with silicon gasket at bottom. Gravity locks with automatic resetting for threaded bolt M16 or 5/8" BSW.
Also Available:
H = 25mm
H = 60 mm
H = 100mm |
|
|
|
|
(SEC-010) GRAVITY LOCK WITH DOUBLE SILICON GASKET (50 mm) |
|
|
Gravity Lock with silicon gasket at bottom and inside. Gravity locks with automatic resetting for threaded bolt M16 or 5/8" BSW. Shaft /inner sealing for an optimal seal between the cap and the spindle boll.
Also Available:
H = 25mm
H = 60 mm
H = 100mm |
|
|
|
| Top |
|
|
(SEC-011) GRAVITY LOCK
WITH BOSCH |
|
|
Gravity Lock with bosch. Gravity locks with automatic resetting for threaded bolts M16 or 5/8" BSW. Mainly used for pressed packages. For columns of packages which tend to sink the caps reset under their own weight and automatically re-lock, to eliminate leakages between cap and head plate. |
|
|
|
|
(SEC-012) GRAVITY LOCK WITH DIE PLATE |
|
|
Gravity lock with die plate with automatic resetting for threaded bolt M16 or 5/8" BSW. |
|
|
|
| (SEC-013) DIE PRESSED PLATE |
(SEC-014) DIE PRESSED SPACERS |
|
|
| |
| (SEC-015) PLAIN PLATE |
(SEC-016) SPACER PLATE |
|
|
|
| (SEC-017) TRIANGLE SPACERS |
(SEC-018) SPANNER |
|
|
|
|
| Top |
|
SEC-019
NUT LOCK WITH PIPE |
SEC-020
SPRING LOCK |
SEC-021
BAYONET LOCK |
SEC-022
STEEL CONE |
 |
 |
 |
 |
|
SEC-023
AUTO LOCK |
SEC-024
NUT LOCK |
SEC-025
VIM NUT |
SEC-026
CIRCLE NUT |
 |
 |
 |
 |
|
SEC-027
S.S. BEAKER |
SEC-028
FIBER CARRIER CHAIN |
SEC-029
DIE PRESSED SPACER |
SEC-030
DIE PRESSED SPACER |
 |
 |
 |
 |
|
SEC-031
ROD SPACER |
SEC-032
SPACER |
|
|
 |
 |
|
|
|
|
| Top |
|
|
Latest Models of Gravity Locks suitable for
Plastic Dye Tubes |
|
|
|
(SEC-033) GRAVITY LOCK WITH SPRING & BOTTOM PLATE |
|
|
Gravity Lock with spring with inside gasket and bottom plate having 2.5mm thickness. Suitable for plastic tubes. Shaft /inner sealing for an optimal seal between the cap and the spindle bolt. (Suitable for plastic dye tube having sizes - 63 OD x 57 ID / 62 OD x 54 ID).
Available also: without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel
Spring : 2.65 mm - ~180 N Standard
3.0 mm - ~250 N |
|
|
|
|
(SEC-034) GRAVITY LOCK WITH SPRING & DEEP GROOVE BOTTOM PLATE |
|
|
Gravity Lock with spring with inside gasket and deep groove bottom plate having 2.5mm thickness with inside silicone ring to fit in plastic tubes. Shaft/inner sealing for an optimal seal between the cap and the spindle bolt. (Suitable for plastic dye tube having sizes - 63 OD x 57 ID) Lock bottom inside ring size 57 OD x 46 ID x 12 mm height.
Available also: without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel.
Spring : 2.65 mm - ~180 N Standard
3.0 mm - ~250 N |
|
|
|
|
(SEC-035) GRAVITY LOCK WITH SPRING & BIG CUP BOTTOM |
|
|
Gravity Lock with spring with big cup bottom to be used directly on plastic tubes without top plates. Shaft /inner sealing for an optimal seal between the cap and the spindle bolt. (Suitable for plastic dye tube having sizes - 63 OD x 57 ID / 62 OD x 54 ID).
Available also: without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel.
Spring : 2.65 mm - ~180 N Standard
3.0 mm - ~250 N |
|
|
|
| Top |
|
|
(SEC-036) GRAVITY LOCK WITH SPRING & SMALL CUP BOTTOM
|
|
|
Gravity Lock with spring with small cup bottom to be used directly on plastic tubes without top plates. Shaft /inner sealing for an optimal seal between the cap and the spindle bolt. (Suitable for plastic dye tube having sizes - 58 OD x 53 ID).
Available also: without lever arm for opening for automatic loading and unloading. Spring pressure at half spring travel
Spring : 2.65 mm - ~180 N Standard
3.0 mm - ~250 N |
|
|
|
|
(SEC-037) GRAVITY LOCK WITH BOSCH WITH GROOVE |
|
|
Gravity Lock with bosch and inside groove to fit in plastic tubes. Gravity locks with automatic resetting for threaded bolts M16 or 5/8” BSW. Mainly used for pressed packages. For columns of packages which tend to sink the caps reset under their own weight and automatically re-lock, to eliminate leakages between cap and head plate. (Suitable for plastic dye tube having sizes - 63 OD x 57 ID / 62 OD x 54 ID).
Available also: With lever arm for opening for automatic loading and unloading. |
|
|
|
|
(SEC-038) GRAVITY LOCK WITH BIG CUP BOTTOM |
|
|
Gravity lock with big cup bottom to fit in plastic dye tube without top plate with automatic resetting for threaded bolt M16 or 5/8” BSW (Suitable for plastic dye tube having sizes - 63 OD x 57 ID / 62 OD x 54 ID)
Available also: With lever arm for opening for automatic loading and unloading. |
|
|
|
|
(SEC-039) GRAVITY LOCK WITH SMALL CUP BOTTOM |
|
|
Gravity lock with small cup bottom to fit in plastic dye tube without top plate with automatic resetting for threaded bolt M16 or 5/8” BSW (Suitable for plastic dye tube having sizes - 58 OD x 53 ID)
Available also: With lever arm for opening for automatic loading and unloading. |
|
|
|
| (SEC-040) CIRCLE SPACER |
(SEC-041) DOUBLE SIDED CIRCLE SPACER |
|
|
|
| (SEC-042) SPACER WITH BOTTOM PLATE |
(SEC-043) TOP / BOTTOM PLATE |
|
|
|
|
|
|
(SEC-044) GRAVITY LOCK WITH SPRING & INVERTED BOTTOM CUP |
|
|
Gravity Lock with spring & Inverted Bottom Cup to be used directly on plastic tubes without top plates.
Available also: with lever arm for opening for automatic loading and unloading. |
|
|
|
|
|
(SEC-045) GRAVITY LOCK WITH SPRING & INBERTED BIG BOTTOM CUP |
|
|
Gravity Lock with spring & Inverted Big Bottom Cup to be used directly on plastic tubes without top plates.
Available also: Without lever arm for opening for automatic loading and unloading. |
|
|
|
|
|
(SEC-046) GRAVITY LOCK WITH SPRING & INVERTED SMALL BOTTOM CUP |
|
|
Gravity Lock with spring & Inverted Small Bottom Cup to be used directly on plastic tubes without top plates.
Available also: Without lever arm for opening for automatic loading and unloading. |
|
|
|
|
|
(SEC-047) GRAVITY LOCK WITH SPRING & TAPERED BOTTOM PIPE |
|
|
Gravity Lock with spring & Tapered Pipe to be used directly on plastic tubes without top plates.
Available also: Without lever arm for opening for automatic loading and unloading. |
|
|
|
|
|
|
|
